Edge pulled away from board, help with fix

Hey guys went riding this weekend and noticed a little part of my edge started to separate from the board, and it looks like the base layer has started to delam. The edge has been cracked for a while but I never had a problem with it. This is my park board and it sees alot of abuse. Id just like to fix it so it doesnt get any worse.

Heres some pictures.




I was going to just fill it with epoxy and clamp the edge back into the board and clamp the plys back together. Now can I just use any epoxy? Its a reverse camber board and it will see a good amount of flex so I dont want the epoxy to just crack right away. What do you think?

Ok cool, Ill find some marine epoxy and let it dry out real good before. Its on the inside of my heelside right binding(Im regular).

It's stupid to put a seam there. Don't they usually put them near the nose and tail of the board?

Make sure you mix the epoxy well first and I use wax paper to keep the epoxy from sticking to anything else like the clamps. 

rmb to get teh marine epoxy but not the quick set type 

it's a fairly in depth repair, the kind I usually don't actually charge for at the shop unless you look like you're rich or give off the air of being a douche bag. What you need to do is cut away that section of base like in a shape kinda like this (l the straight line being your edge and then push your edge back into place and put a very small screw in to keep it in place and then either do a base patch (put a new section of base in or fill it with p tex) I'd recommend using black ptex string or ribbon and a soldering iron if you choose the p tex option, use 24 hour epoxy if you do the base patch might be a good idea to epoxy it as well as screw it in place, good luck. If you happen to be in the tahoe area I can do the repair for you, just pm me.

Same thing happened to my board two years ago. The edge cracked but i just left it alone. Surprisingly it didnt really affect my riding like i thought even after a good five inch section completely broke off. I just use it for urban now or for crappy days on the mountain and its still fine.

looks good bro. I just fixed my girlfriends board. the whole tail was all separated and I actually only used crazy glue. I wish I saw this thread before I did it. Looks a lot better than mine does. Of course, mine was pretty messed up and took a lot to fix. Anyways, looks good!

Wow that turned out realy nice. YOu can't tell it was ever separated

Thanks guys, Ill definitely let you know how it holds.

Wow, you can barely tell it was even broken in the first place, nice DIY fix!

Well after riding on it a couple of times the epoxy sort of let go. Its in such a high flex area Im not really surprised. The edge is still holding to the board, its not as bad as before, but the base plys are starting to separate again. Oh well, Ive been looking at new boards anyways.